Cylinder Burr

No rotary carving kit is complete without the quintessential cylinder burr. It's the #2 Phillips- head screwdriver of carving tools; you're going to use it like crazy.

The Kutzall Cylinder burr is often used to cut flat surfaces, or 90˚ corners.  Tilt the tool and you can use the corner to notch out v-shaped cuts, or show off your freehand skills and use it to soften or round-over sharp edges.

Kutzall Cylinder Burrs are available with 1/4" and 1/8" shaft diameters, multiple head diameters, and coarse or fine grit. Like your #2 Phillips head screwdriver, your Cylinder Burr will be your "go-to tool", time and time again. And, since it's a Kutzall tungsten-carbide burr, no matter how much you use it, your cylinder burr will stay sharp longer.