Brush away buildup
A few passes with a soft wire brush help clear material from between the teeth.
1/4″ Shaft 3-Piece Fine Kit
1/4″ shaft
Die grinders + flex shafts
Technique inspirationStart with a setup that fits.Tool size + grade shown may differ.
1/4″ Shaft 3-Piece Fine Kit
Rated 5.0 out of 5 stars
20
Gradual shaping + a finer finish with three larger carving heads.
Sale price
$ 59.75
Shipping calculated at checkout
1/4″ shaft · Check your fit
Match a 1/4″ collet or compatible chuck. Check your tool’s mounting + speed limits. Hand drills + drill presses are not recommended.
Included grade
Fine
See included shapes + sizes
Original tooth structure
Free U.S. shippingOn orders over $50
Made in the USA3 burrs · 1/4″ shaft
Meet the shapes in your kit
Each profile gives you a different way to shape, hollow or refine your work.
-
Sphere
1″ × 1″
Shape rounded recesses, inside curves + hollows.
-
Flame
1/2″ × 1″
Blend flowing curves into narrow grooves + details.
-
Ball Nose
3/4″ × 1-1/8″
Round edges + carve hollows with a curved bottom.
Shape references are not to scale. Head sizes are base diameter × length; the teeth make the finished head slightly larger.
FineOriginal tooth structure
Fine + Coarse use Original teeth for controlled shaping. Choose Fine for a finer finish or Coarse for faster removal.
Compare your kit options
Other 1/4″ shaft kits. Choose the grade and shape mix that suit your work.
Full product details
Refine larger woodcarving forms with three Fine-grade burrs for a compatible die grinder or flex-shaft handpiece. The Sphere, Flame and Ball Nose offer complementary ways to shape hollows, blend curves and round edges. Their larger carving heads and Fine teeth suit gradual shaping and a finer finish.
Made in the USA, the structured tungsten-carbide teeth are brazed to steel for controlled material removal. Carve with or across the grain, using light pressure as you approach the finished shape.
Works with
- Wood
- Plastic
- Drywall
- Rubber
- Fiberglass
- Soft stone
Not for use on
Metals, ceramics or hard stone.
Mounting Guide
- Match your shaft size
Use a 1/4″ collet or compatible adjustable chuck on a suitable rotary tool, die grinder or flex-shaft handpiece. Hand drills and drill presses are not recommended.
- Seat the shaft securely
Insert at least half of the shaft into the collet or chuck. Secure it according to your power tool’s instructions.
- Use the recommended speed
Recommended operating range: 15,000–30,000 RPM. Both material-removal rate and control improve as speed increases toward the burr’s recommended operating range. Never exceed the lowest maximum speed rating in your setup. Use light pressure and let the tool do the work.
- Let it stop completely
Let your power tool stop completely before setting it down.
Caring for your Kutzall
Clear stubborn residue
For stubborn wood residue only, follow the torch-cleaning steps in our care guide. Let heated metal cool naturally before handling.
See cleaning stepsProtect the teeth
Kutzall’s tungsten-carbide teeth are securely brazed to the steel tool with a nickel alloy. Protect the teeth from impact against hard surfaces, especially while spinning. Let your power tool stop completely before setting it down.
Not for use on metals, ceramics or hard stone.
More on tool careLet the tool cool before handling. Keep heat away from handles and other non-metal components.
Customer reviews
From the Kutzall community.
Real experiences. Shared by makers like you.
Tap a photo or video to explore the project + read the review.
100%would recommend this product
Slide 1 selected
20 reviews
- DDaveReviewing1/4" Shaft – 3-Piece Kit, Fine FineI recommend this productRated 5 out of 5 stars4 minutes ago5 Stars
Works as designed and no vibration in high speed die grinder
- DCDonna C.Verified BuyerReviewing1/4" Shaft – 3-Piece Kit, Fine FineI recommend this productRated 5 out of 5 stars4 months agoWorks great!
These are awesome !
- JPJoe P.Verified BuyerReviewing1/4" Shaft – 3-Piece Kit, Fine FineI recommend this productRated 5 out of 5 stars4 months agoWorks as advertised
Hard to imagine carving and doing a lot of the little detailed work on a variety of woodcraft scenes and carbs without these particular bits. I’m able to sculpt out a wide area and then narrow it down as I need. The clean easily using a wire brush. Make sure that you dry them. I use a hair dryer. To avoid any rust and then be careful because they are sharp, and if you have any type of a blister, they will puncture it. And always remember safety first when working with these vets. Good eyewear, good gloves, and a mask.
- GGGabrielle G.Verified BuyerReviewing1/4" Shaft – 3-Piece Kit, Fine FineI recommend this productRated 5 out of 5 stars8 months agoFast and Easy
These burrs make spoon making a joy! They’re solid and just the right size. Perfect for my projects.
- CMClay M. B.Verified BuyerReviewing1/4" Shaft – 3-Piece Kit, Fine FineI recommend this productRated 5 out of 5 stars9 months agoLove them
Love them! Using to sculpt a Maloof rocking chair and they work beautifully!
