Skip to content

Country

4-1/2" Diameter - Original - Shaping Discs

Regular price $ 55.00

SKU:  SD412O230
5.0
Rated 5.0 out of 5 stars
39
Coarseness
Wheel Diameter x Bore

Unlock the versatility of your ordinary angle grinder and let a Kutzall Shaping Wheel optimize your creative control! Shape, contour, hollow, trim, notch or make adjustments with ease as they wheel will be your go-to workhorse for any task.

 The Shaping Discs allows you to effortlessly level high spots or adjust uneven surfaces. The structured teeth wrap over at the outer diameter, allowing for edge-on detailing. Despite their relatively flat shape, their slight curvature allows for controlled, free-hand, flat or convex shaping.

Proposition 65

This product can expose you to chemicals including Nickel (Metallic), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Mounting Guide

The Kutzall Shaping Wheels feature a 7/8” I.D and are intended to mount on a standard electric angle grinder with a 5/8” shaft. They mount on the 7/8” shoulder found on the flange or adapter included with most angle grinders. The flange is put on the grinder first, followed by the wheel and then the nut.

Caring for your Kutzall tool

Kutzall tools can be easily cleaned using a torch and/or a quick few passes with a soft wire brush, the heat will not harm the teeth!

What Our Customers Are Saying

The Power Carver's Choice

Made in the U.S.A.

Free U.S. Shipping

5.0
Rated 5.0 out of 5 stars
Based on 39 reviews
Total 5 star reviews: 39 Total 4 star reviews: 0 Total 3 star reviews: 0 Total 2 star reviews: 0 Total 1 star reviews: 0
100%would recommend this product
Customer-uploaded media carousel. Press left and right arrows to navigate. Press space or enter to open more details.
Slide 1 selected
39 reviews
  • HM
    Harry M.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    2 days ago
    Great disk! But now what you need to make is ..

    The fine abrasive disk has been my go-to for a long time. I have coarse and regular Kutzall disk as well as a number of Kutzall burrs, but this is my fave. My 'old' one is fine, but I bought another to mount on a fixed grinder so I could use them without conversion time. If you could make it in an even finer abrasive, I'd buy that as well. The only downside with the fine abrasive is that it tends to gum up if the wood isn't dry, but it cleans up fantastically with a quick soak in soapy water. I've never been in enough of a hurry to try to burn off gummy residue.

    What would really be useful is a fine or medium burr in approximately the same profile as the cutting ball I use for most of my rough cutting. It would essentially be a burr that has an angle grinder attachment rather than a shaft. With this, I could finish and detail the interior of the spoons & bowls more easily and with greater control since I could hold onto the grinder with both hands. Holding onto the handle of a flex-shaft with both hands just isn't as stable. A low-quality product like this exists (https://tinyurl.com/224aa4uc), but it's not nearly as good as what I'd expect from Kutzall. And the abrasive is simply cut divots which would wear out quite quickly. The pix are examples of what I make using your products.

    Thanks

    Harry

  • CM
    Clifford M.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    6 months ago
    Great

    This tool works great!

    Use extreme caution this tool , it does a good job!

  • JC
    James C.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    3 months ago
    Works well, paid for itself immediately

    Used for an immediate hardwood shaping project. Works well, saved a lot of finishing time, recommended.

  • JF
    James F.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    3 months ago
    They work great

    I have a course shaping disc and dish. They are easy to use.

    I'm working on Velvet Mesquite 2 in. slabs for a coffee table and was dreading removing

    the bark. Not a problem with these. I would suggest though, that if you are dealing with more bark than I am get the extreme disc.

  • NR
    Nathaniel R.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    4 months ago
    High quality, sharp af

    Chewed through red oak like it was butter, even with my underpowered angle grinder. 10/10, would recommend.

Reviews LoadedReviews Added

Shopping Cart