Brush away buildup
A few passes with a soft wire brush help clear material from between the teeth.
1/8″ Shaft 4-Piece Very Coarse Kit
1/8″ shaft
Small rotary tools
Technique inspirationFollow the line. Make it yours.Tool size + grade shown may differ.
1/8″ Shaft 4-Piece Very Coarse Kit
Rated 5.0 out of 5 stars
62
Aggressive removal for rough shaping, with four versatile shapes.
Sale price
$ 70.55
Shipping calculated at checkout
1/8″ shaft · Check your fit
Match a 1/8″ collet or compatible chuck. Check your tool’s mounting + speed limits. Hand drills + drill presses are not recommended.
Included grade
Very Coarse
See included shapes + sizes
Extreme tooth structure
Free U.S. shippingOn orders over $50
Made in the USA4 burrs · 1/8″ shaft
Meet the shapes in your kit
Each profile gives you a different way to shape, hollow or refine your work.
-
Taper
1/8″ × 7/8″
Follow contours, refine edges + reach tighter spaces.
-
Sphere
3/8″ × 3/8″
Shape rounded recesses, inside curves + hollows.
-
Flame
1/4″ × 1/2″
Blend flowing curves into narrow grooves + details.
-
Ball Nose
1/4″ × 1/2″
Round edges + carve hollows with a curved bottom.
Shape references are not to scale. Head sizes are base diameter × length; the teeth make the finished head slightly larger.
Very CoarseExtreme tooth structure
Very Coarse uses the open-spaced Extreme tooth structure for fast removal with less loading in soft, wet or gummy woods.
Compare your kit options
Other 1/8″ shaft kits. Choose the grade and shape mix that suit your work.
4-Piece Fine Kit
Gradual shaping + a finer finish with four versatile shapes.
4-Piece Coarse Kit
Faster shaping to establish the form, with four versatile shapes.
5-Piece Variety Kit
Five shapes + mixed grades for shaping, refining + adding grooves.
4-Piece Fine Detail Kit
Smaller heads for fine lines, intricate texture + tight spaces.
Full product details
Get the rough shape in place with four Very Coarse burrs for power carving. Their open-spaced Extreme teeth suit fast removal in soft, wet or gummy woods. Move between the Taper, Sphere, Flame and Ball Nose as your woodcarving develops, then use lighter passes as you approach the final form.
Made in the USA, the structured tungsten-carbide teeth are brazed to steel for controlled material removal. Carve with or across the grain, using light pressure as you approach the finished shape.
Works with
- Wood
- Plastic
- Drywall
- Rubber
- Fiberglass
- Soft stone
Not for use on
Metals, ceramics or hard stone.
Mounting Guide
- Match your shaft size
Use a 1/8″ collet or compatible adjustable chuck on a suitable rotary tool, die grinder or flex-shaft handpiece. Hand drills and drill presses are not recommended.
- Seat the shaft securely
Insert at least half of the shaft into the collet or chuck. Secure it according to your power tool’s instructions.
- Use the recommended speed
Recommended operating range: 15,000–30,000 RPM. Both material-removal rate and control improve as speed increases toward the burr’s recommended operating range. Never exceed the lowest maximum speed rating in your setup. Use light pressure and let the tool do the work.
- Let it stop completely
Let your power tool stop completely before setting it down.
Caring for your Kutzall
Clear stubborn residue
For stubborn wood residue only, follow the torch-cleaning steps in our care guide. Let heated metal cool naturally before handling.
See cleaning stepsProtect the teeth
Kutzall’s tungsten-carbide teeth are securely brazed to the steel tool with a nickel alloy. Protect the teeth from impact against hard surfaces, especially while spinning. Let your power tool stop completely before setting it down.
Not for use on metals, ceramics or hard stone.
More on tool careLet the tool cool before handling. Keep heat away from handles and other non-metal components.
Customer reviews
From the Kutzall community.
Real experiences. Shared by makers like you.
Tap a photo or video to explore the project + read the review.
100%would recommend this product
Slide 1 selected
62 reviews
- TBTimothy B.Verified BuyerReviewing1/8" Shaft – 4-Piece Kit, Very Coarse Very CoarseI recommend this productRated 5 out of 5 stars3 weeks agoWorks Great
So far I've only used the Flame burr and the Taper burr. They both work amazing. Anyone wanting to get into power carving wood should definitely give these sets a try. You Will Not be disappointed.
- TNTom N.Verified BuyerReviewing1/8" Shaft – 4-Piece Kit, Very Coarse Very CoarseI recommend this productRated 5 out of 5 stars2 months agoRelief carving
Just started carving!! Works great
- BLBarry L.Verified BuyerReviewing1/8" Shaft – 4-Piece Kit, Very Coarse Very CoarseI recommend this productRated 5 out of 5 stars5 months agoNice bits
Sweet
- TTimothyReviewing1/8" Shaft – 4-Piece Kit, Very Coarse Very CoarseI recommend this productRated 5 out of 5 stars5 months ago5 Stars
Amazing product.
- FDFabio D.Verified BuyerReviewing1/8" Shaft – 4-Piece Kit, Very Coarse Very CoarseI recommend this productRated 5 out of 5 stars6 months agoVery good the tool i ever had to sand carving wood. Definitely i will buy more
Very good the tool i ever had to sand carving wood. Definitely i will buy more
