Fine + Coarse
Original tooth structureChoose Fine for a finer surface finish or Coarse for faster shaping. Both use randomly positioned teeth for controlled carving.
1/8″ Shaft Taper Burr
1/8″ shaft
Small rotary tools
Technique inspirationFollow the line. Make it yours.Tool size + grade shown may differ.
1/8″ Shaft Taper Burr
Rated 5.0 out of 5 stars
54
Shape at a glance
Shape edges, follow contours + reach tight spaces.
Sale price
€13,95
Shipping calculated at checkout
1/8″ shaft · Check your fit
Match a 1/8″ collet or compatible chuck. Check your tool’s mounting + speed limits. Hand drills + drill presses are not recommended.
Head size Diameter × length
Free U.S. shippingOn orders over $50
Made in the USAPurpose + control
Put it to work
Tapered profile
Follow contours and reach into tight spaces.
Edges + detail
Refine transitions and shape small features.
Controlled passes
Work gradually to keep small details defined.
Match the grade to the job
How the teeth work
Very Coarse
Extreme tooth structureOpen-spaced conical teeth for fast removal with less loading in soft, wet or gummy woods.
Details + dimensions
Contours, edges + tighter spaces
The Kutzall 1/8″ Shaft Taper Burr narrows toward the tip, combining power carving on outside contours and edges with access to smaller spaces. Use the wider part of the profile to shape a contour, then move toward the tip for fine details, concave cuts or undercuts. It is a versatile woodcarving shape for projects that need both broad shaping and more focused work.
The 1/8″ shaft fits a matching collet or compatible adjustable chuck on a small rotary tool. Match the head size to the space you want to carve, and check your power tool’s mounting and speed limits before use.
- Head sizeDiameter × length
- 1/4″ × 1/2″
- Shaft diameter
- 1/8″
Overall length: 1-5/8″Weight: .0625 lbs.
Head sizes exclude teeth. Allow extra clearance in tight spaces.
Works with
- Wood
- Plastic
- Drywall
- Rubber
- Fiberglass
- Soft stone
Not for use on
Metals, ceramics or hard stone.
Mounting Guide
- Match your shaft size
Use a 1/8″ collet or compatible adjustable chuck on a suitable rotary tool, die grinder or flex-shaft handpiece. Hand drills and drill presses are not recommended.
- Seat the shaft securely
Insert at least half of the shaft into the collet or chuck. Secure it according to your power tool’s instructions.
- Use the recommended speed
Recommended operating range: 15,000–30,000 RPM. Both material-removal rate and control improve as speed increases toward the burr’s recommended operating range. Never exceed the lowest maximum speed rating in your setup. Use light pressure and let the tool do the work.
- Let it stop completely
Let your power tool stop completely before setting it down.
Caring for your Kutzall
Brush away buildup
A few passes with a soft wire brush help clear material from between the teeth.
Clear stubborn residue
A torch can remove stubborn buildup from the metal working surface. The tungsten-carbide teeth tolerate the heat.
Protect the teeth
Kutzall’s tungsten-carbide teeth are securely brazed to the steel tool with a nickel alloy. Protect the teeth from impact against hard surfaces, especially while spinning. Let your power tool stop completely before setting it down.
Not for use on metals, ceramics or hard stone.
More on tool careLet the tool cool before handling. Keep heat away from handles and other non-metal components.
Customer reviews
From the Kutzall community.
Real experiences. Shared by makers like you.
Tap a photo or video to explore the project + read the review.
100%would recommend this product
Slide 1 selected
54 reviews
- RMRalph M.Verified BuyerReviewing1/8" Shaft - Taper Burrs - 1/4" x 1/2" Very CoarseI recommend this productRated 5 out of 5 stars1 month agoAll your burrs are awesome
All your burrs are awesome
- DEDouglas E. J.Verified BuyerReviewing1/8" Shaft - Taper Burrs - 1/4" x 1/2" CoarseI recommend this productRated 5 out of 5 stars5 months agoBest bits
As a chainsaw carver, I use Kutzall bits to finalize the details. Best bits available!
Facebook. Com/wrecksrme
- MNMary N.Verified BuyerReviewing1/8" Shaft - Taper Burrs - 1/4" x 1/2" CoarseI recommend this productRated 5 out of 5 stars8 months agoGreat for duck decoy and shore bird carving
Just exactly what I needed. I can always count on Kutzall !
Mike Neering
Saginaw
- KJKevin J. M.Verified BuyerReviewing1/8" Shaft - Taper Burrs - 1/4" x 1/2" FineI recommend this productRated 5 out of 5 stars10 months agoWork Great
As all my other Kutzalls they work fantastic. Love the small dtail size.
- JWJames W.Verified BuyerReviewing1/8" Shaft - Taper Burrs - 1/4" x 1/2" CoarseI recommend this productRated 5 out of 5 stars1 year agoBest burrs ever
These burrs are better than I could ever hope for
