Fine + Coarse
Original tooth structureChoose Fine for a finer surface finish or Coarse for faster shaping. Both use randomly positioned teeth for controlled carving.
1/8″ Shaft Cylinder Burr
1/8″ shaft
Small rotary tools
Technique inspirationFollow the line. Make it yours.Tool size + grade shown may differ.
1/8″ Shaft Cylinder Burr
Rated 5.0 out of 5 stars
36
Shape at a glance
Shape flat surfaces + square shoulders.
Sale price
€11,95
Shipping calculated at checkout
1/8″ shaft · Check your fit
Match a 1/8″ collet or compatible chuck. Check your tool’s mounting + speed limits. Hand drills + drill presses are not recommended.
Head size Diameter × length
Free U.S. shippingOn orders over $50
Made in the USAPurpose + control
Put it to work
Straight sides
Level flat surfaces and establish straight walls.
Flat end
Shape square shoulders and flat-bottomed recesses.
Controlled passes
Ease pressure as you approach the finished shape.
Match the grade to the job
How the teeth work
Very Coarse
Extreme tooth structureOpen-spaced conical teeth for fast removal with less loading in soft, wet or gummy woods.
Details + dimensions
Flat surfaces + defined corners
The Kutzall 1/8″ Shaft Cylinder Burr gives you a straight-sided profile with a flat end for power carving flat areas, square shoulders and 90-degree corners. Both the sides and the end are working surfaces, so you can change the tool angle to round over an edge or make a V-cut. Choose this shape when your woodcarving project calls for defined transitions and flatter surfaces.
The 1/8″ shaft fits a matching collet or compatible adjustable chuck on a small rotary tool. Match the head size to the space you want to carve, and check your power tool’s mounting and speed limits before use.
- Head sizeDiameter × length
- 1/8″ × 7/8″
- Shaft diameter
- 1/8″
Overall length: 1-3/4″Weight: .0625 lbs.
Head sizes exclude teeth. Allow extra clearance in tight spaces.
Works with
- Wood
- Plastic
- Drywall
- Rubber
- Fiberglass
- Soft stone
Not for use on
Metals, ceramics or hard stone.
Mounting Guide
- Match your shaft size
Use a 1/8″ collet or compatible adjustable chuck on a suitable rotary tool, die grinder or flex-shaft handpiece. Hand drills and drill presses are not recommended.
- Seat the shaft securely
Insert at least half of the shaft into the collet or chuck. Secure it according to your power tool’s instructions.
- Use the recommended speed
Recommended operating range: 15,000–30,000 RPM. Both material-removal rate and control improve as speed increases toward the burr’s recommended operating range. Never exceed the lowest maximum speed rating in your setup. Use light pressure and let the tool do the work.
- Let it stop completely
Let your power tool stop completely before setting it down.
Caring for your Kutzall
Brush away buildup
A few passes with a soft wire brush help clear material from between the teeth.
Clear stubborn residue
A torch can remove stubborn buildup from the metal working surface. The tungsten-carbide teeth tolerate the heat.
Protect the teeth
Kutzall’s tungsten-carbide teeth are securely brazed to the steel tool with a nickel alloy. Protect the teeth from impact against hard surfaces, especially while spinning. Let your power tool stop completely before setting it down.
Not for use on metals, ceramics or hard stone.
More on tool careLet the tool cool before handling. Keep heat away from handles and other non-metal components.
Customer reviews
From the Kutzall community.
Real experiences. Shared by makers like you.
Tap a photo or video to explore the project + read the review.
100%would recommend this product
Slide 1 selected
36 reviews
- JMJohn M.Verified BuyerReviewing1/8" Shaft - Cylinder Burrs - 1/8" x 7/8" CoarseI recommend this productRated 5 out of 5 stars3 weeks agoCylinder Burr
It's amazing
- AHAndreas H.Verified BuyerReviewing1/8" Shaft - Cylinder Burrs - 1/8" x 7/8" FineI recommend this productRated 5 out of 5 stars7 months agoTop quality
Top quality
- SSShawn S.Verified BuyerReviewing1/8" Shaft - Cylinder Burrs - 1/8" x 7/8" Very CoarseI recommend this productRated 5 out of 5 stars8 months agoWorth every penny!
These are the best bits of there, bar none!
- MNMarian N.Verified BuyerReviewing1/8" Shaft - Cylinder Burrs - 1/8" x 7/8" FineI recommend this productRated 5 out of 5 stars10 months agoGreat
Just what I needed
- MPMatthew P.Verified BuyerReviewing1/8" Shaft - Cylinder Burrs - 1/8" x 7/8" CoarseI recommend this productRated 5 out of 5 stars10 months agoGreat burr
This is a great burr for carving stairs on a gnome home. The flat end cleans up corners. great.
