Fine + Coarse
Original tooth structureChoose Fine for a finer surface finish or Coarse for faster shaping. Both use randomly positioned teeth for controlled carving.
1/8″ Shaft Dove Tail Burr
1/8″ shaft
Small rotary tools
Technique inspirationFollow the line. Make it yours.Tool size + grade shown may differ.
1/8″ Shaft Dove Tail Burr
Rated 5.0 out of 5 stars
22
Shape at a glance
Create undercuts + reach into corners.
Sale price
57.00 NIS
Shipping calculated at checkout
1/8″ shaft · Check your fit
Match a 1/8″ collet or compatible chuck. Check your tool’s mounting + speed limits. Hand drills + drill presses are not recommended.
Free U.S. shippingOn orders over $50
Made in the USAPurpose + control
Put it to work
Flared profile
Create undercuts and reach into corners.
Detail work
Shape recesses where a straight-sided burr cannot reach.
Controlled passes
Work gradually to keep small details defined.
Match the grade to the job
How the teeth work
Very Coarse
Extreme tooth structureOpen-spaced conical teeth for fast removal with less loading in soft, wet or gummy woods.
Details + dimensions
Undercuts + fine-line detail
The Kutzall 1/8″ Shaft Dove Tail Burr uses a reversed taper that widens toward the end. In power carving, its sharp corners help define fine-line details, V-cuts and undercuts, while the flared profile reaches beneath an overhanging edge. This shape is useful in woodcarving when the detail you want sits behind an edge or needs a more defined corner than a rounded burr can create.
The 1/8″ shaft fits a matching collet or compatible adjustable chuck on a small rotary tool. Match the head size to the space you want to carve, and check your power tool’s mounting and speed limits before use.
- Head sizeDiameter × length
- 3/8″ × 1/2″
- Shaft diameter
- 1/8″
Overall length: 1-9/16″Weight: .0625 lbs.
Head sizes exclude teeth. Allow extra clearance in tight spaces.
Works with
- Wood
- Plastic
- Drywall
- Rubber
- Fiberglass
- Soft stone
Not for use on
Metals, ceramics or hard stone.
Mounting Guide
- Match your shaft size
Use a 1/8″ collet or compatible adjustable chuck on a suitable rotary tool, die grinder or flex-shaft handpiece. Hand drills and drill presses are not recommended.
- Seat the shaft securely
Insert at least half of the shaft into the collet or chuck. Secure it according to your power tool’s instructions.
- Use the recommended speed
Recommended operating range: 15,000–30,000 RPM. Both material-removal rate and control improve as speed increases toward the burr’s recommended operating range. Never exceed the lowest maximum speed rating in your setup. Use light pressure and let the tool do the work.
- Let it stop completely
Let your power tool stop completely before setting it down.
Caring for your Kutzall
Brush away buildup
A few passes with a soft wire brush help clear material from between the teeth.
Clear stubborn residue
A torch can remove stubborn buildup from the metal working surface. The tungsten-carbide teeth tolerate the heat.
Protect the teeth
Kutzall’s tungsten-carbide teeth are securely brazed to the steel tool with a nickel alloy. Protect the teeth from impact against hard surfaces, especially while spinning. Let your power tool stop completely before setting it down.
Not for use on metals, ceramics or hard stone.
More on tool careLet the tool cool before handling. Keep heat away from handles and other non-metal components.
Customer reviews
From the Kutzall community.
Real experiences. Shared by makers like you.
Tap a photo or video to explore the project + read the review.
100%would recommend this product
Slide 1 selected
22 reviews
- DBDouglas B.Verified BuyerReviewing1/8" Shaft - Dove Tail Burrs - 3/8" x 1/2" Coarse / 3/8" x 1/2"I recommend this productRated 5 out of 5 stars3 weeks agoDove tail burr
Worked great, worked great on my witch carving. Going to try the detail bit set next great product.
- DBDavid B.Verified BuyerReviewing1/8" Shaft - Dove Tail Burrs - 3/8" x 1/2" Coarse / 3/8" x 1/2"I recommend this productRated 5 out of 5 stars1 month agoOpinion on this burr
Cuts well -use in wood relief carvings and I use both the corse and fine types of this burr -has reduce my fabricating time down and really does a superior job .
- RRRon R.Verified BuyerReviewing1/8" Shaft - Dove Tail Burrs - 3/8" x 1/2" Fine / 3/8" x 1/2"I recommend this productRated 5 out of 5 stars9 months agoGreat Burr
Shipped fast and does just what I imagined.
Excellent quality.
- TYThomas Y.Verified BuyerReviewing1/8" Shaft - Dove Tail Burrs - 3/8" x 1/2" Coarse / 3/8" x 1/2"I recommend this productRated 5 out of 5 stars9 months agoDove tail burr
It’s a great burr. Just what I needed.
- RFRick F.Verified BuyerReviewing1/8" Shaft - Dove Tail Burrs - 3/8" x 1/2" Fine / 3/8" x 1/2"I recommend this productRated 5 out of 5 stars1 year agoGreat Burr
A handy shape that works beautifully.
